SOK U/K 115
Concrete release agent mainly for use in precast plants
Performance Features
- application temperature: up to 90 °C (shuttering temperature)
- includes a very effective corrosion protection for steel shuttering
- universally applicable
- suitable for the manufacture of exposed concrete
- prevents pore formation to a large extent
- provides clean and uniform surfaces
- no adverse effect on the adhesion of plaster, adhesives or paint
Description
SOK U/K 115 is a concrete release agent suitable for all absorbent and non-absorbent shuttering types. The aromatics are to a large extent extracted from the solvent contained, resulting in a positive effect on the prevention of odor.
Field of application
SOK U/K 115 is suitable for all shuttering types, e.g. planed shuttering, steel shuttering, film and plastic-coated panels, polysulphide matrixes and ABS foil-coated systems.
Application
SOK U/K 115 is applied by brush or suitable spraying device (with Teejet nozzle SS 800067) to the clean and dry shuttering in a thin and uniform layer. Consumption rates: with non-absorbent shuttering: 50-100 m2/l; with absorbent shuttering: 40-80 m2/l. SOK U/K 115 may not be diluted with water, oils or solvents – it is ready for use !
Note
- storage temperature not below -5 °C.
- the duration of storage should not exceed 1 year.
- store barrels horizontally
- reseal container after use to prevent active ingredients from escaping at higher temperatures
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.