SOK WAX 1
Concrete parting agent for use in civil engineering and precast plants
Performance Features
- temperature for use up to 50 °C (formwork temperature)
- universal application
- prevents pore formation to a great extent
- ensures clean and even surfaces
- resistant to rain
Description
SOK WAX is a pasty parting agent (parting wax).SOK WAX 1 and SOK WAX 3 differ in their consistencies. SOK WAX 1 constitutes the softest variety and SOK WAX 3 the hardest.At high external temperatures (> 25 °C) the use of SOK WAX 3 is recommended.
Field of application
SOK WAX is suitable for all formwork, e.g. wood, plastic-lined wooden materials, steel, etc.
Method of application
SOK WAX is applied with a brush or a cloth. Consumption differs depending on the application case. SOK WAX may not be diluted with water, oils, or solvents - the delivered concentration is ready for use!
Note
- storage temperature not below +10 C
- the storage period should not exceed 1 year
- reseal packaging after removal
Note the WHG and EC safety data sheet! Important: If you use SOK WAX there is not always a plaster, adhesive and paint adhesion.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.