MOLYPAUL 707
Thermosetting MoS2 solid film lubricant
Performance Features
- temperature range: -180°C / +250 °C
- forms a dry, adhesive lubricating film
- resists maximum loads
- after thermosetting resistant to mineral oil
- guarantees a constant friction coefficient
- improves running-in behaviour and load bearing capacity of oil and grease-lubricated elements
- guarantees easy assembly
Description
MOLYPAUL 707 is a thermosetting solid film lubricant based on an organic binder, solvent and molybdenum disulphide.
Field of application
MOLYPAUL 707 is mainly used in case of low sliding speeds and high loads, and in combination with oils and greases. Examples are running-in and emergency lubrication for differential gears and plain bearings, dry lubrication of threaded spindles, magnetic cores, clamps, adjustment screws and mechanisms, joint pins, guide rails, stud-bolts, nuts, and dowel pins.
Method of application
Apply MOLYPAUL 707 by compressed air and airless spraying sysetms. Dipping is advisable with large quantities of small parts. Due to nonuniform coating thicknesses, coating by brush or roller can only be recommended if spraying or dipping is impossible. In case of spraying systems storage tanks equipped with a stirring device are recommended. Thoroughly degrease the lubrication surfaces using a solvent and let dry. To increase adhesion and thus service life a pretreatment by sand blasting or phosphatizing is recommended.
Note
Stir well before use! Shelf life: 18 months in closed original containers at ambient temperature.
Industries
- Automotive
- Machinery, equipment
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.