VITROLIS SHEARLUBE 722X
Gob Shear Lubricant
Advantages/Benefits
- Exceptional lubrication, cooling and corrosion protection greatly extends blade life and cutting performance from very high dilution emulsions
- Enhanced economies in use due to reduced lubricant consumption and lower effluent disposal or treatment costs
- Excellent tolerance to hard water salts thus minimising the potential for soap formation and giving reduced problems of blockages etc
- Lubricity components are based on vegetable oil derivatives with very high thermal stability, minimising sticky/resinous type build up around the shear head area
- Readily biodegradable therefore meeting the latest criteria for todays environmentally conscious manufacturing units
- Resistant to extremes of high and low temperature producing an extremely stable neat concentrate with good resultant emulsion characteristics
- Excellent health, safety and hygiene properties due to its non toxic/hazardous nature.
Description
In common with other SHEARMASTER products, VITROLIS SHEARLUBE 722X is a sophisticated formulation which is water emulsifiable and is classified under current regulations as non-toxic and is fully biodegradable. The lubricant has been specifically designed to work at extremely high dilution rates, starting at 800:1 up to 1500:1, yet still maintaining outstanding blade life and quality of shear cut.
Due to the excellent biodegradability and emulsion characteristics of the product it is particularly suited to a direct dosing system where the lubricant is injected into the water phase just prior to the shear head. It can also be used in older type re-circulating systems although it is strongly recommended that the holding tank for the emulsion is fitted with mechanical agitation.
For optimum lubricant performance softened water is recommended for preparation of the emulsion. However, the product is formulated on vegetable oil derived feed stocks and relatively inert emulsifiers/anticorrosive additives to give high tolerance to hard water salts and improved thermal stability.
Application
VITROLIS SHEARLUBE 722X is a further development of the successful range of lubricants for gob shear applications. Its principal application is in the container and table ware Industries to lubricate and cool the gob shear blades in the process of cutting molten glass.
Mixing Instructions
Optimum mixing is obtained by adding VITROLIS SHEARLUBE 722X to water or emulsion at a point of high turbulence and at a temperature above 10°C.
Storage
Drums should be stored on their sides in a clean, dry place and should be protected from extremes of temperature.
Industries
- Glass industry
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.