VITROLIS SPC 100 L
Graphite lubricant for mould coating
Advantages/Benefits
- Simple operation
- Good lubricating quality
- Extremely durable, stable film
- Improves initial results following change of mould
- Smooth and uniform coating
- Best possible economic efficiency
VITROLIS SPC 100L sets new standards regarding the important criteria for lubrication, ergonomics and environmental compatibility.
Description
VITROLIS SPC 100L for the “spray coating of moulds” is a specially developed graphite lubricant, which dries immediately at room temperature leaving a highly durable, stable film on metallic surfaces.
The thin film guarantees good lubricating properties of the moulds.
VITROLIS SPC 100L is recommended for blank moulds, rings, base plates and finish moulds – particularly in cases where cracking can be a problem.
VITROLIS SPC 100L improves the initial results as well as the appearance of the glass after the mould has been changed.
Application
VITROLIS SPC 100L is sprayed at room temperature onto the clean, grease-free iron or bronze moulds from a distance of about 30cm.
A smooth, uniform coating of 0.2 to 0.5mm is sufficient to produce the best results.
The film is already touch-dry after a few minutes and usable after approximately 2 hours.
Industries
- Glass industry
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.