GLEITMO HMP 8420
Drsni lak s tesnilnimi lastnostmi ter korozijsko zaščito
Performance Features
- temperature range: -40 / +110 °C
- meets the friction coefficient requirements of the automotive industry (VDA) for screw lubricants
- provides an uncoloured, shiny and absolutely touch-proof lubricating film
- is suitable for small bulk parts
- saves assembly time and is particularly suited for automatic screw-driving systems
- is clean and non-greasing
- has a very good surface adhesion on a lot of materials
- is environmentally and user friendly
- contains a UV additive for a UV coating inspection (340 – 380 nm)
Description
GLEITMO HMP 8420 is a water-based dry solid film lubricant with corrosion protection sealing properties. The dry lubricating film remaining upon application shows a very good adhesion on different surface types, forming an uncoloured, glossy, transparent and touch-proof film.
Field of application
GLEITMO HMP 8420 is used for the lubrication of screws/bolts and nuts in order to achieve defined friction coefficients (µ = 0.09-0.14) as specified by the automotive industry (VDA). In combination with zinc-alloy coatings, e.g. zinc/nickel or zinc/iron, and as top coat for zinc flake coatings, GLEITMO HMP 8420 significantly increases the corrosion protection. GLEITMO HMP 8420 allows sealing and lubrication of the parts in one process step only.GLEITMO HMP 8420 is suitable for bolt connections of aluminium alloys.
Method of application
GLEITMO HMP 8420 is ready for use, but may be diluted if required. As a rule, GLEITMO HMP 8420 is applied by dipping and centrifuge coating procedures. Its application is performed directly after passivation and subsequent rinsing of the parts. After the coating procedure the parts are dried by hot air (part temperature of 80 - 120 °C). An increase within this range may have a positive effect on the corrosion protection properties of the dry lubricating film.
Note
Protect against freezing!Shelf-life: 6 months in closed original containers at room temperature.
Panoge
- Avtomobilizem
- Stroji, oprema
Podatki
Atesti
FUCHS priporočila
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.