STRATUS 815 HC
Description
STRATUS 815 HC is a cutting fluid based on syn-thetic base oil as well as additives that minimize the formation of oil mist. The product contains carefully selected additives de-livering extremely good lubrication which ensure minimal tool wear. STRATUS 815 HC is stable against oxidation and the low viscosity provides good cooling effect.
Application
STRATUS 815 HC is recommended for cutting pro cessing in all steel grades, aluminium and titanium. The product is designed for use in the most severe operations like deep hole drilling, reaming and threading. STRATUS 815HC is also recommended for some plastic operations when high film strength and low friction is required. STRATUS 815 HC contains active sulphur and wil miscolour copper and its alloys.
.Advantages
- Excellent lubrication
- Superb surface finish
- Low mist formation
- Extremely low wear
- Low drag out losses
Handling and storage
Avoid skin contact. In the event of contact with skin, wash with soap and water. Dispose of used oil at a recycling station or equivalent. Safety data sheets are available on www.fuchs.com/se or supplied on request.
Industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.