RENISO TRITON SE 220
Description
The refrigeration oils of the RENISO TRITON SE/SEZ series are based on synthetic esters that were especially developed for use with chlorine-free, fluorinated hydrocarbons. RENISO TRITON SE/SEZ refrigeration oils are miscibible and compatible with HFC/FC and HFO refrigerants – including HFO/HFC refrigerant blends.
Application
The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. RENISO TRITON SE/SEZ refrigeration oils are also suitable for HFO and HFO/HFC refrigerants. Depending on the viscosity the refrigeration oils are recommended for hermetical, semi-hermetical and open piston compressors and for screw-type and turbocompressors. RENISO TRITON SEZ 22 is especially suitable for deep-freeze systems operating with R23. RENISO TRITON SE/SEZ products are also suitable for hydrocarbon refrigerants (e.g. propane, polypropylene, isobutane) and R22. In such cases please contact FUCHS prior to the usage.
Advantages/ Benefits
- Special synthetic polyolester
- Stable lubrication film even at high temperatures, outstanding lubricity
- Excellent miscibility with HFC/FC and HFO refrigerants – including HFO/HFC refrigerant blends
- Very high thermal and chemical stability in the presence of fluorinated refrigerants
- Good viscosity-temperature behavior
- Excellent cold temperature flowability
- Secure oil return from the system, good heat transfer
- Good compatibility with elastomers and materials normally used in refrigeration circuits
- Readily biodegradable (ISO VG 32 and ISO VG 55)
- Approved by leading compressor manufacturers
- Ultra-dried
Note
Because of their chemical structure, ester-based oils tend to absorb water. For this reason, RENISO TRITON SE/SEZ should be in contact with ambient air only for a short time. When opened, the content should be used up in short time.
Industries
- Other industries
- Transport
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.