LUBRODAL F 24 W
Water-miscible die lubricant, containing graphite
Performance Features
- can be used for metal working and casting operations as well as for warm forging
- can be diluted with water as required
- can be used at mid-range and high temperatures
- acts as a lubricant, release agent and coolant
- creates a flexible, lubricant film on the dies, which will not run off
- an effective alternative to conventional graphite/water and graphite/oil suspensions
Description
LUBRODAL F 24 W contains finely ground graphite in a water based emulsion which contains oil. LUBRODAL F 24 W is a homogenous, low-sediment, concentrated lubricant which can be diluted with tap water to any strength required. LUBRODAL F 24 W was specifically developed for warm steel forging operations. However, it can also be used for other metal working procedures.
Areas of application
LUBRODAL F 24 W is particularly suitable for high-lycomplex forging operations involving mid-range and high temperatures, e.g. for lubricating dies during warm and hot forging operations or for lubrication during semi-hot forging. In addition to its lubricating and release properties, LUBRODAL F 24 W also acts as a tool coolant. This is due to its water content. LUBRODAL F 24 W may be used in any situation where traditional graphite and water dispersions have reached the limit of their effectiveness. LUBRODAL F 24 W is an effective and economical alternative to the traditional graphite and oil suspensions used in semi-hot forging procedures.
Method of application
LUBRODAL F 24 W is a die lubricant which must be thinned with water before use. The optimum proportions of water to lubricant depend on the application, and must be tried out on site in each particular case. Depending on how it is to be used, LUBRODAL F 24 W can be mixed with water using a suitable mechanical stirrer. Despite the fact that the suspension is extremely stable, we recommend that the working liquid be continuously stirred to prevent any of the particles settling out.
LUBRODAL F 24 W can be applied to forging tools with any of the commonly used spraying equipment (automatic or manual). Its excellent wetting properties means that it can create an effective; lubrication film, even in the deepest cuts in the die.
Storage
LUBRODAL F 24 W must be stored in a closed container to prevent water evaporation creating a skin.
Guidelines for dilution:
Die forging: 5...10 parts water, 1 part LUBRODAL F 24 W
Hot forging (extrusion): 3...7 parts water, 1 part LUBRODAL F 24 W
Hammer forging: 2...10 parts water, 1 part LUBRODAL F 24 W
Semi-hot forging, complex operation: 1...2 parts water, 1 part LUBRODAL F 24 W
Semi-hot forging, subsequent stages: 2...5 parts water, 1 part LUBRODAL F 24 W
Industries
- Forging
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.