RENOLIT CA-LZ SPRAY
Description
RENOLIT CA-LZ SPRAY is an EP adhesive grease based on a calcium thickener and mineral oil. RENOLIT CA-LZ SPRAY is characterised by water resistance, sealing and adhesive properties. The operating temperature range of RENOLIT CA LZ SPRAY is -30 to +120 °C.
Application
RENOLIT CA-LZ SPRAY is mainly used for the following application(s) / function(s):
- Agricultural and forestry machinery
- Construction machinery
- Lubrication points with presence of moisture or water
Advantages
- Fluorescent
- Very good wear protection
- Very good water resistance
- Extends relubrication intervals
- Good load-carrying capacity (EP)
Storage Conditions
The minimum shelf life is 36 months if the product is properly stored between 0 °C and 40 °C in its unopened original container in a dry place. The indication of a minimum shelf life does not include any guarantee of durability.
Notes
Ideally, the spray can should be used at an ambient temperature of between 20-25 °C and, for safety reasons, never above 50 °C. The use of RENOLIT CA-LZ SPRAY SPRAY is particularly suitable for hard-to-reach areas. Clean the lubrication point and spray the spray evenly onto the surfaces. After applying the spray, the solvent should be allowed to evaporate for at least 30 minutes.
Safety and disposal instructions can be found in the current safety data sheet.
Industries
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.