FRICOFIN LD
Description
FRICOFIN LD is an antifreeze coolant concentrate based on monoethylene glycol and is used for engines in Heavy Duty vehicles, passenger cars and stationary engines. As X-OAT coolant concentrate it provides a stable inhibitor system based on organic acids (OAT) for maximum drain intervals and a small concentration of inorganic inhibitors (X) to enhance the performance. FRICOFIN LD is free of nitrites, borates, silicates, and phosphates.
Application
FRICOFIN LD is excellent for use where a coolant with OAT technology is required. Suitable for use in various internal combustion engines and also suitable to use for indirect cooling of Hybrid and Battery Electric Vehicles (BEVs) in automotive and heavy-duty applications if there is no requirement on electrical conductivity. Manufacturers’ drain intervals and recommendations about the concentration are mandatory. FRICOFIN LD is a coolant concentrate and must be diluted with water before it is filled into the cooling system. The concentration rate should be between 33 % to 70 % by volume, typically 50 %. The properties of the water should not exceed the following limits:
Water hardness: 0 - 20 °dH (0-3.6 mmol/l)
Chloride content: 100 ppm max.
Sulphate content: 100 ppm max.
By adding distilled or deionized water these values can be easily adjusted, if necessary. Always observe the manufacturers recommendations when mixing with other coolants. As with all coolants, even with FRICOFIN LD, the use of galvanized components in cooling circuits and as a part of storage or mixing installation (e.g. for pipes) should be avoided. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages
▪ Superior protection against freezing and overheating.
▪ Compatible with seals, plastics and non-ferrous metals.
▪ Contains bittering agent to prevent swallowing.
▪ Excellent long-lasting protection against deposits, cavitation and corrosion in engines and coolers.
▪ Suitable for the longest oil drain intervals.
▪ Successfully tested for Heavy Duty applications without requiring an initial filling of Supplement Coolant Additive (SCA).
▪ Greatly reduces the risk of deposits.
▪ Contains a special additive to compensate for flux contamination from the CAB (Controlled Atmosphere Brazing) process.
Industries
- Automotive
Specifications
▪ ASTM D 3306 TYPE I
▪ ASTM D 6210 TYPE I-FF
▪ GB 27943.1-2022
▪ Tata Motors - Jaguar (STJLR.03.5212)
▪ VOLVO VCS-2
Approvals
▪ DEUTZ DQC CB-14
FUCHS Recommendations
▪ AS/NZS 2108.1-1997
▪ CNH MAT 3624
▪ CNH MAT 3724
▪ CAT GCM34
▪ CAT EC-1
▪ Chevrolet GMW 3420
▪ DAF 74002
▪ DETROIT DIESEL 93K217
▪ Ford WSS M97B44-D
▪ FIAT 9.55523
▪ GM6277M
▪ GMW 18270
▪ GMW 3420
▪ IVECO 18-1830
▪ JOHN DEERE JDM H5
▪ Kobelco
▪ Komatsu 07.892 (2017)
▪ Leyland Trucks DW03245403
▪ MAN 324 TYPE SNF
▪ Mahle – Behr
▪ MB 325.3 / DTFR 29C120
▪ Mitsubishi MHI
▪ MTU MTL 5048
▪ Perkins
▪ Isuzu - UD Trucks
▪ RTCS-2
▪ SAAB B 04 01065
▪ Santana Motors
▪ SKODA 61-0-0257
▪ Yanmar
▪ UNE 26-361-88/1
▪ VW TL 774-D/F (G12+)
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.