GLEITMO HMP CLEANER
Cleaner for dry GLEITMO HMP films
Performance Features
- excellent cleaning effect
- short soak time
- simple application
- economical to use
- ready-to-use
- dilutable with tap water if necessary
Description
GLEITMO HMP CLEANER is an aqueous lkaline cleaner for removing dry GLEITMO HMP (high-molecular polymer) films on coated substrates and coating equipment.
Field of application
GLEITMO HMP CLEANER is particularly suitable for the removal of dry coatings of GLEITMO 605. In addition to this, however, all other GLEITMO HMP films can easily be removed with it (Exception GLEITMO 603).
Application
A short soak time of approx. 1-2 minutes is sufficient to remove dry GLEITMO HMP films. Both dipping of the substrate as well as simply spraying or brushing it on bring about the desired dissolvent effect. After the soak time a good rinse with water is usually sufficient to remove the HMP film completely. In the case of severe encrustations (e.g. on containers or spraying equipment) mechanical assistance or a second cleaning cycle may possibly be necessary. After filtering off the dirt particles the cleaner can be re-used several times. If the cleaning ability diminishes, partial renewal can sufficiently restore the cleaning ability once more. Where there is a low level of contamination the cleaner can be diluted with tap water up to a mixture ratio of 1:1.
Notes
GLEITMO HMP CLEANER is not suitable for use as a degreasing medium in cleaning baths. At present there is no point at which incompatibilities with galvanised surfaces may be encountered, if the soak time is observed.With corrodible substrates and equipment parts careful drying is necessary following rinsing. In the case of periods of long storage or non-use a corrosion preventive should be applied.Protect from frost! May be stored in sealed containers at room temperature for up to 36 months.
Industries
- Steel, metals
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.