GLEITMO 625
Suh mazalni film
Performance Features
- temperature range for the dry solid lubricant: -40 / +110 °C
- to achieve low friction coefficients/grooving torques for bolted connections, with a low variation
- to avoid seizures of stainless steel bolt connections
- provides a clear, touch-proof and abrasion-resistant lubricating film
- suitable for mass parts
- saves assembly time and is particularly suited for automatic systems
- is clean and non-greasing
- very good adhesion on a lot of material surfaces
- contains a UV additive for a UV coating inspection (340 – 380 nm)
Description
GLEITMO 625 is a suspension of high-molecular polymers in water. GLEITMO 625 is used as a coating agent and develops a well adhering, touch-proof lubricating film after drying. GLEITMO 625 has been developed to achieve defined low friction coefficients with a minimum variation range.
Field of application
GLEITMO 625 is used for mass part lubrication. A typical application example is the coating of stainless-steel screws/bolts and nuts, self-tapping or self-forming screws, rivets, sheet-metal screws, and chip-board screws.
Method of application
Depending on the requirements, GLEITMO 625 can be diluted with water (at least drinking water quality). As a rule, GLEITMO 625 is used at a dilution ratios of 1 : 3 (for centrifuge coating procedures, stringent require-ments) up to 1 : 7 (for dipping). In individual cases a dilution ratio of 1 : 1 to 1 : 2 is used to achieve lowest grooving torques. The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanising industry have proved to be convenient in case of large coating quantities. After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approxi-mately 80 °C).
Note
Protect against freezing! In closed original containers at room temperature storable up to 24 months.
Panoge
- Avtomobilizem
- Stroji, oprema
- Jekla, kovine
Podatki
Atesti
FUCHS priporočila
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.