GLEITMO SFL 9540
MoS2 drsni lak, utrjevanje s temperaturo
Performance Features
- temperature range: -180 / +300 °C
- forms a dry, solid film lubricant
- is resistant to solvents and mineral oils as well as synthetic fluids
- supports oil or grease lubrication
- provides clean assembly conditions
- is resistant to extremely high pressures
- offers corrosion protection
- improves running-in properties of oil or grease-lubricated parts substantially
Description
GLEITMO SFL 9540 is a selected combination of solid lubricants, organic binders and solvents. Upon curing, GLEITMO SFL 9540 forms a dry, solid film lubricant firmly adhering, resistant to oil, to solvents and to high pressures, with corrosion protection, applicable over a wide range of temperatures. In the area of boundary and mixed friction, GLEITMO SFL 9540 supports an oil or grease lubrication outstandingly well.
Field of application
GLEITMO SFL 9540 improves running in conditions, protection against surface damage and wear especially at high pressures and low sliding speeds. In many cases, lifetime lubrication is possible. Typical Applications: Gear wheels, bearing bushes, pivot pins, plain bearing axles, special steel fitting components, chain parts, wearing rings and locking disks, large threaded connections, ceramic parts, slid-ing parts exposed to high temperatures.
Method of application
The parts to be coated should be thoroughly de-greased. The surface should be dry for application of GLEITMO SFL 9540. To increase the adhesive strength, and therefore the lifetime, pre-treatment of the surfaces is recommended by phosphatising or sand-blasting. In order to achieve quicker drying and improved adhesion of the coating, pre-heating of the parts to about 80-120 °C before coating has proved to be effective.
Note
Stir well before use! Shelf-life: 18 month in closed original containers at room temperature.
Panoge
- Avtomobilizem
- Stroji, oprema
- Jekla, kovine
Podatki
Atesti
FUCHS priporočila
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.