LUBRODAL F 41 G
Grafitni koncentrat na vodni osnovi za postopke vročega preoblikovanja
Performance Features
- lubricant preferably used in semi hot forging
- effective in complex forming operations
- forms a dry, adhesive layer on the die surface
- improves shaping and reduces forming force
- releases the processed metal effectively from the die surface
- easy miscible with water
- stable against sedimentation
- cost- effective to use
Description
LUBRODAL F 41 G is a water miscible graphite dispersion with effective lubricating and release properties. LUBRODAL F 41 G is supplied in concentrated form and can be diluted with tap water. LUBRODAL F 41 G is based on a selection of types of graphite which have various particle sizes. The high percentage of the finest particles ensures effective coverage of surfaces, while the coarser particles provide maximum temperature resistance. The highly ground graphite ensures that the concentrate is both - extremely stable and easy to dilute.
Method of application
LUBRODAL F 41 G is preferably used as circulatory lubricant for semi hot forging of steel. LUBRODAL F 41 G can be diluted as required. The easiest method is to first stir in a small quantity of water and then keep adding water and continue stirring until the required dilution is achieved. The optimum rate of dilution has to be determined in practice.
Application
LUBRODAL F 41 G can be applied using spray guns, static and automatic spraying equipment and also by flooding. The diluted product must be kept in continuous motion either by a stirrer or circulation pump, to avoid settling out. The equipment should be cleaned by flushing through with water if it is going to stand idle for any period of time.
Panoge
- Kovaštvo
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.