GLEITMO 625

Performance Features

• temperature range for the dry solid lubricant: -40 / +110 °C
• to achieve low friction coefficients/grooving torques for bolted connections, with a low variation
• to avoid seizures of stainless steel bolt connections
• provides a clear, touch-proof and abrasion-resistant lubricating film
• suitable for mass parts
• saves assembly time and is particularly suited for automatic systems
• is clean and non-greasing
• very good adhesion on a lot of material surfaces
• contains a UV additive for a UV coating inspection (340 – 380 nm)

Description

GLEITMO 625 is a suspension of high-molecular polymers in water. GLEITMO 625 is used as a coating agent and develops a well adhering, touch-proof lubricating film after drying. GLEITMO 625 has been developed to achieve defined low friction coefficients with a minimum variation range.

Field of application

GLEITMO 625 is used for mass part lubrication. A typical application example is the coating of stainless-steel screws/bolts and nuts, self-tapping or self-forming screws, rivets, sheet-metal screws, and chip-board screws.

Method of application

Depending on the requirements, GLEITMO 625 can be diluted with water (at least drinking water quality). As a rule, GLEITMO 625 is used at a dilution ratios of 1 : 3 (for centrifuge coating procedures, stringent require-ments) up to 1 : 7 (for dipping). In individual cases a dilution ratio of 1 : 1 to 1 : 2 is used to achieve lowest grooving torques. The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanising industry have proved to be convenient in case of large coating quantities. After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approxi-mately 80 °C).

Note

Protect against freezing! In closed original containers at room temperature storable up to 24 months.