RENISO KC 68
Description
The oils in the RENISO K range are based on highly refined naphthenic selective raffinates. The oils are specially dewaxed for use as refrigeration oils at low temperatures. The products in the RENISO K range have excellent stability with the refrigerant ammonia (NH₃), HCFC and hydrocarbon refrigerants.
Application
RENISO KM 32, KS 46, KC 68 and KW 150 are recommended for use with ammonia (NH₃), HCFC (e.g. R22) and hydrocarbon refrigerants (e.g. propane, propene, isobutane) in open-, semi hermetic-, and hermetic compressors. RENISO KES 100 is recommended for high condensation and high evaporation temperatures with HCFC refrigerants (e.g. bus and car air conditioning systems).
Advantages
- High chemical and thermal stability with ammonia- NH₃
- Prevent breakdowns caused by formation of wax deposits
- Very good flowability at low temperatures (especially at low evaporation temperatures)
- Good solubility and miscibility with HCFC refrigerants, e.g., R22
- Very low water content - ultra dried
Industries
- Other industries
- Machinery, equipment
- Food
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.