ANTICORIT WMC 9000
Description
ANTICORIT WMC 9000 is a water-miscible modern corrosion protection concentrate which forms a stable and coarse dispersed emulsion which yields an extraordinary corrosion protection film. ANTICORIT WMC 9000 creates a thin, oily, non-sticky and non-resinating protective film on bare metal and phosphated surfaces. ANTICORIT WMC 9000 is used whenever high requirements for corrosion protection are necessary, despite it’s low costs when used as an emulsion.
Application
To prepare an emulsion of ANTICORIT WMC 9000, a water temperature between 40 and 50 °C is recommended. Product is typically allied by dipping, spraying is also possible.
Preparation:
Heat water to target temperature, and then add concentrate. Agitation will speed up the formation of a stable emulsion but is typically not necessary when bath is in use. ANTICORIT WMC 9000 should be used as an emulsion (5 – 20 %) at temperatures of 20 – 50 °C. Depending on the concentration, different film thickness will result. Bath temperatures should not exceed 50 °C if the concentration is > 10 %. During the term the bath should be inspected in regular intervals.
Benefits
- emulsion is easy to set up
- excellent corrosion protection
- excellent wetting properties
- easy to remove
- free of barium
- free of secondary amines through TRGS 615 ***), Point 2 (5)
Storage Conditions
If sealed in the original container ANTICORIT WMC 9000 can be stored up to 12 months at temperatures between + 5 and + 40 °C. The indication of a minimum period of storage does not include any guarantee of durability.
Industries
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.