ECOCOOL BFF 25
Advantages / Benefits
- For machining cast iron, steel and aluminum
- Extremely good anti-corrosion properties
- Excellent cooling and cleaning properties
- Free from boron, MEA and formaldehyde
- Very stable emulsion
- Low foaming
- Highly lubricating product
Description
ECOCOOL BFF 25 is a water-miscible cutting fluid of the highest quality. The product is based on highly refined base oil with carefully selected additives for best performance. ECOCOOL BFF 25 is free of boron, monoethanolamine (MEA) and formaldehyde.
Application
The product has a wide range of uses and is recommended for processing in cast iron, steel and aluminum. For sensitive aluminum alloys, we recommend to perform a discoloration test before starting maching.
Recommended concentration The concentration depends on the application but should not be below 6% to guarantee the performance of the product.
Handling and storage
Avoid skin contact. In the event of contact with skin, wash with soap and water. Dispose of used oil at a recycling station or equivalent. Safety data sheets are available on www.fuchs.com/se or supplied on request.
Industries
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.