RENEP CGLP 150
Description
The quality of machined components depends heavily on the accurate feed and accurate positioning provided by machine tool slideways with slideway oils playing an important role. Slideway oils must provide a stable, adhesive lubricating film in the presence of metalworking fluids even in microfeed situations and when pressures are high. Good lubrication eliminates chattering and thus ripples on the surface of components caused by stick-slip. RENEP CGLP oils were developed together with the Tribological Laboratory at the University of Darmstadt and the Laboratory for Tribology and Sliding Technologies (SKC-Technik). Carefully selected base oils and matched additives guarantee almost friction-free movement at the lubrication points. Special attention during development was also paid to compatibility with the water-miscible cutting fluids used in machine tools. Anti-corrosion agents and ageing (oxidation) inhibitors are effective at relatively low temperatures (working temperature = room temperature). EP and anti-wear additives guarantee long machine life and exceptionally good operational reliability.
The selected additive combinations create layers which have a low internal friction. Furthermore, polar surface-active substances form a stable, adhesive lubricating film. This reduces friction when movement starts, lowers the initial current consumption and optimizes the efficiency of the machine tool.
Application
To reduce the power consumption during slideway start-ups and feed situations, special attention must be paid to the lubricant between the sliding elements. Important parameters for the selection of the most suitable slideway oil are the cutting fluid, the slideway materials and the geometry of the lubrication grooves. The lubrication intervals must be matched to the machining operation and the design of the machine. Apart from the classic cast-cast, steel-cast and steel-plastic slideway materials, there is an increasing trend towards linear guides in machine tools. The RENEP CGLP series of products are also recommended for these machine elements. Moreover, RENEP CGLP 68 can also be used as a hydraulic oil according to DIN 51 524-2, ISO 6743-4. This product can thus perform the functions of a lubricant and a hydraulic oil. The RENEP CGLP oils were developed with the relevant technical application requirements of slideway oils in mind. RENEP CGLP slideway oils were supplied to all leading machine tool and component manufacturers.
Advantages
- Stable lubricating film.
- Low coefficient of friction.
- Avoidance of stick-slip.
- Good EP properties and excellent protection against wear.
- Excellent corrosion protection (steel and nonferrous metals).
- Good demulsification, optimum compatibility with water-miscible cutting fluids.
- Excellent compatibility with plastic materials (slideway materials).
- No discoloration of the slideway material.
Industries
- Machinery, equipment
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.