RENOLIN ETERNA 46
RENOLIN ETERNA turbine oils were developed for gas, steam, and expansion turbines as well as for turbo compressors with and without gearboxes based on the latest lubrication technology. The excellent properties of the base oils produced in a special process are enhanced using a carefully selected additive system. RENOLIN ETERNA oils contain no organo-metallic compounds and are therefore ash-less. They provide a zinc free wear protection.
Application
RENOLIN ETERNA is especially suited for use in turbine systems with a common control and lubricating oil circuit. It can also be used as a bearing and sealing oil in hydrogen-cooled generators. RENOLIN ETERNA has excellent anti wear properties and excellent Vickers Vane Pump results, V104C. RENOLIN ETERNA has excellent wear protection properties. The failure load stage is 12 according to FZG test DIN ISO 14635-1. RENOLIN ETERNA shows excellent roller bearing wear protection. FE8 test is passed with excellent result. RENOLIN ETERNA can be used as CLP (EP) gear oil according to DIN 51517-3. RENOLIN ETERNA can also be used as lubricating oil in Hydropower turbines (water turbines).
Advantages
- High thermal stability
- Good viscosity-temperature behaviour
- Rapid air release
- No foaming
- Low pourpoint
- Good wear protection
- Excellent corrosion protection
- Good water separation behaviour
Specifications
RENOLIN ETERNA 32/46 are approved by: Siemens Power Generation
The RENOLIN ETERNA range also meets and in many cases exceeds the requirements of:
- DIN 51515-1 (TDP) with and without gearbox
- DIN 51515-2 (TGP) with and without gearbox
- DIN 51524-2: HLP
- (DIN 51524-3: HVLP – with exception of the VI)
- GE GEK 28568 A
- GE GEK 32568 J
- GE GEK 101941 A
- GE GEK 107395 A
- Siemens TLV 901304 / 901305
- Alstom HTGD 90117 V0001W
- Siemens MAT 812109
- MAN Turbo AG – SP10000494596, Germany
- Solar ES 9-224 ( Class I / Class II )
- MIL-PRF-17331 J
- DIN 51517-3 (CLP gear oil)
- ISO 7624: pass > 4,000 h
Industries
- Mining, quarrying, exploration
- Power generation
- Cement
- Other industries
- Casting
- Construction
- Forging
- Glass industry
- Machinery, equipment
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.