RENOLIN UNISYN XT 150
Description
The products of the RENOLIN UNISYN XT series are demulsifying, fully-synthetic industrial gear oils with elevated aging resistance, excellent load-carrying capacity and wear protection, based on polyalphaolefins of the latest generation. RENOLIN UNISYN XT oils show good resistance to micropitting. Reliable lubrication of roller bearings is confirmed by the good results of the FE8 testing. Moreover the RENOLIN UNISYN XT oils show a good filterability. The products are preferably used when increased requirements are set for high and low operating temperatures. Especially in low temperature areas
RENOLIN UNISYN XT shows significant advantages in comparison to conventional PAO based industrial gear oils. In gearboxes and circulating systems with sump temperatures up to 90 °C, longer oil-change intervals in comparison with previous mineral oils are achieved.
Miscibility with gearbox oils based on mineral oil and PAO is generally given, which means that simplified conversion to RENOLIN UNISYN XT is possible. Nevertheless a complete change-over is recommended (perhaps with flushing procedure) to receive the full performance of RENOLIN UNISYN XT and especially to exploit the advantages in comparison to conventional oils.
Advantages
- Excellent low temperature behaviour
- Low foaming
- Good air release capacity
- Very good aging resistance
- Excellent corrosion protection
- Excellent viscosity-temperature behavior
- Very high natural VI (viscosity index)
- Multigrade character
- Excellent wear protection, high EP performance
- Miscible with mineral oil- and ester-based gear oils
- Prolongation of the service intervals possible
- For high and low operating temperatures
Application
The oils of the RENOLIN UNISYN XT series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears, worm gears and planetary gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150 °C. RENOLIN UNISYN XT can particularly be used if high low temperature demands for the gear oil are required.
Specifications
The products meet and in many cases exceed the requirements according to:
- DIN 51517-3: CLP
- ISO 6743-6 and ISO 12925-1:CKC / CKD / CKE / CKSMP
- AGMA 9005/E02: EP
- AIST 224
- Flender approval according to Flender BA 7300, Table A
Industries
- Mining, quarrying, exploration
- Agriculture, forestry
- Power generation
- Construction
- Transport
- Machinery, equipment
- Cement
- Forging
- Casting
- Metal processing
- Other industries
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.