TITAN GEAR HYP LD SAE 80W-90
Description
TITAN GEAR HYP LD SAE 80W-90 is an Ultra High Performance gear oil based on selected base oils and an improved additive technology. This ensures optimised oxidation and shear stability, an improved temperature-viscosity behaviour as well as a very good wear and corrosion protection. At the same time it offers a very good compatibility with elastomers. It has been approved according to MB 235.20. But it can be used in many other applications. Extended oil drain intervals can be achieved (up to 350.000 km) according to the manufacturer's recommendations.
Application
TITAN GEAR HYP LD SAE 80W-90 was designed for use in highly loaded hypoid gearboxes of commercial vehicles. TITAN GEAR HYP LD SAE 80W-90 was especially developed for Mercedes. It is mainly used if MB 235.20 is required.
Advantages
- Very high thermal and oxidation stability prevents oil thickening and deposits.
- Very good wear protection of bearings and gears even under severe operating conditions.
- Improved fuel economy because of its low viscosity and cold-temperature properties.
- Suitable for extended drain intervals.
Industries
- Automotive
- Agriculture, forestry
- Transport
- Construction
- Consumer, aftermarket
- Other industries
Specifications
- API GL-5
- API MT-1
- SAE J2360
Approvals
- DETROIT DIESEL 93K219.02
- DTFR 12B110
- EvoBus 26.000-032
- EvoBus 26.000-034
- JOHN DEERE JDM J11E
- MAN 342 TYPE M3
- MB-APPROVAL 235.20
- SCANIA STO 1:0
- VOLVO 97321
- ZF TE-ML 05A, 12L, 12M, 16B, 17B, 19B, 21A (ZF000645)
FUCHS Recommendations
- MIL-PRF-2105 E
- ARVIN MERITOR 0-76-D
- FORD WSP-M2C197-A
- MACK GO-J
- ZF TE-ML 07A
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.