AGRIFARM STOU MC SAE 10W-30
Description
AGRIFARM STOU MC SAE 10W-30 is an Ultra High Performance multifunctional fuel-economy oil (STOU/UTTO) based on MC-Base-Oil technology for engines, manual gearboxes, wet brakes, hydraulics and turbodrives in tractors and other agricultural and commercial vehicles. Special additives also provide an outstanding deceleration performance combined with a high capability of noise suppression during the oil drain interval.
Application
AGRIFARM STOU MC SAE 10W-30 is recommended for use in engines, manual transmissions, hydraulic systems, multi-plate differentials, and final drives, with or without wet brakes. Manual transmissions and hydraulic transmission systems in agricultural or construction machinery with HD engine oil of type SAE 10W-30 as service recommendation may also be switched to AGRIFARM STOU MC SAE 10W-30. Manual transmissions having SAE 75W-80 and API GL-4 service recommendation can be switched to AGRIFARM STOU MC SAE 10W-30. Tractors working with connected equipment should be completely switched to AGRIFARM STOU MC SAE 10W-30. AGRIFARM STOU MC SAE 10W-30 is miscible and compatible with conventional, branded multifunctional oils. However, mixing with other multifunctional oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended before converting to AGRIFARM STOU MC SAE 10W-30. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages
- Supports reduced variety of products.
- Applicable as all-season lubricant.
- Increased fuel economy.
- Suitable for use with bio diesel (FAME) acc. to DIN EN 14214.
- Very low oil consumption.
- Prevents deposits.
Industries
- Agriculture, forestry
- Automotive
- Construction
- Consumer, aftermarket
- Other industries
- Transport
Specifications
- API GL-4
- SAE J300: 10W-30
Approvals
- DEUTZ DQC I-02
- ZF TE-ML 06B, 06F, 07B (ZF011954)
FUCHS Recommendations
- ACEA E3
- API CG-4
- AFNOR NFE 48603 HV
- ALLISON C-4
- CASE MS 1207, 1209, 1210, 1230
- CNH MAT 3505, 3509, 3525, 3526
- DIN 51524-3: HVLP (-D)
- FORD M2C48-C3, M2C86-B, M2C134-D, M2C159-B/C
- JOHN DEERE JDM J20 C
- MASSEY FERGUSON CMS M 1145, 1144, 1143, 1139, 1135
- NH 82009201/2/3
- NH 410C, 410B, 420A
- SAE J306: 75W-80
- ZF TE-ML 06A, 06C
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.