RENISO PG 68
Description
The refrigeration oil RENISO PG 68 is based on a selected combination of polyalkylene glycols (PAG) and special additives and is miscible with ammonia (NH₃). RENISO PG 68 is characterised by excellent lubrication properties, very good viscosity temperature behaviour, and high chemical and thermal stability in the presence of ammonia.
Application
The refrigeration oil RENISO PG 68 is especifically designed for refrigerating units where the use of ammonia soluble refrigeration oils is required. RENISO PG 68 is suitable for the lubrication of piston compressors and screw compressors in industrial and commercial refrigerating units using ammonia as a refrigerant for direct expansion systems.
Advantages
- Good miscibility and solubility with NH₃ (miscibility gap 10% oil: -35°C)
- Good viscosity-temperature behaviour
- Excellent low temperature flowability
- Extreme thermal and chemical stability with NH₃
- Good lubricating properties
- RENISO PG 68 is ultra dried
Notes
RENISO PG 68 is highly hygroscopic. Minimize exposure of the product to ambient air. After opening a container, use the entire contents within one working day and ensure that the container is tightly sealed between uses. RENISO PG 68 is not miscible and compatible with mineral oil.
Industries
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.