ECOCOOL FERROSTAR MBF
Description
ECOCOOL FERROSTAR MBF is a premium-quality, boron-free, water-miscible and mineral oil-based cutting fluid, which can be used multifunctional formachining of cast iron, steel and all common aluminium materials. For critical aluminium alloys we recommend carrying out a pre staining test.
When mixed with water, ECOCOOL FERROSTAR MBF forms a stable, long-life, finely dispersed emulsion. The use of carefully matched mineral oil cuts, emulsifiers, corrosion inhibitors and other additives give the product outstanding performance.
The specifically selection of the emulsifiers allows the use of ECOCOOL FERROSTAR MBF as an emulsion cleaner for spray and dipping processes. ECOCOOL FERROSTAR MBF forms at metal surfaces a thin, non-sticky film and generates an excellent corrosion protection after washing and drying.
Benefits
- high emulsion stability
- boron free
- excellent corrosion protection, leaves a thin, oily film
- low foaming (also at +60°C)
- high cutting performance
- good evenly wetting and flushing behaviour and therefore cooling
- keeps machines clean
- free of chlorine, nitrite and zinc
- free of monothanolamine
- multifunctional use for machining cast iron, steel and aluminium
- multifunctional use as spray and dipping cleaner
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.