GLEITMO 980 SPRAY
PTFE solid film lubricant spray
Description
GLEITMO 980 SPRAY is an air-drying solid film lubricant spray with inorganic binder and solvent. It contains a polytetrafluoroethylene prepared using a special process as an active ingredient with a high release effect. GLEITMO 980 SPRAY adheres very well to many materials.
Application
GLEITMO 980 SPRAY is used for dry lubrication of a wide variety of material combinations of metals, plastics, rubber, wood and much more. As clean sliding layers for goods at risk of contamination. Instead of oily or greasy lubricants in the textile and plastics industry, for blinds, shutters and doors. For initial lubrication of plastic injection-moulded parts. Squeaking and sticking friction points of wood, plastics or leather. GLEITMO 980 SPRAY can be applied easily by aerosol spray cans. Shake the can thoroughly for at least one minute before spraying (mixing balls must be audible). GLEITMO 980 SPRAY is sprayed evenly onto the previously cleaned and degreased components. GLEITMO 980 is also available as bulk product for application with compressed air and airless spraying systems as well as for dip and spray coatings.
Advantages
- Usage temperature range of the dry film: -180 / 250°C
- Produces dry, thin lubricating layers
- Generates low coefficients of friction
- Adheres very well to all material surfaces
- Offers excellent non-stick and release properties
- Does not stain nor grease
- Facilitates the assembly of parts with robots
- Contains no halogenated solvents
Industries
- Automotive
- Machinery, equipment
- Consumer, aftermarket
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.