POWDER MoS2 S SPRAY
Molybdenum disulphide powder-Spray
Description
POWDER MoS2 S Spray is a pure molybdenum disulfide powder spray made from natural molybdenite. The manufacturing process maintains the preservation of the natural structures.
Application
POWDER MoS2 S Spray is suitable for lubricating cold forming processes and for dry lubrication of components that cannot be lubricated with greases or oils. POWDER MoS2 S Spray enables the economical application of a lubricating film to small parts with a low weight. Before applying POWDER MoS2 S Spray, the surfaces of the parts to be treated should be cleaned with a solvent. POWDER MoS2 S Spray is sprayed from the aerosol can onto the surfaces to be lubricated in a targeted and economical manner.
Advantages
- Wide operating temperature range
- Very high thermal and chemical stability
- Low coefficient of friction at high load
- Good adhesion due to a high affinity for metal surfaces
- Free from abrasive particles
- Non-conductive
- Non-ferromagnetic
Storage Conditions
Proper storage of unopened original containers, not exposed to sunlight or rain, is required.
Industries
- Automotive
- Machinery, equipment
- Other industries
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.