Care for your cutting fluid before longer breaks
Many choose to change their cutting fluid and clean tanks, chip conveyors, etc. Others choose to save the fluid over the holiday periods. Whichever option you choose, there are some things to consider before a holiday break.
Change of fluid
When replacing the coolant, add ECOCOOL CLEAN 1 with 1.5% concentration in existing cutting fluid. Run normal operation for at least 24 hours, drain the fluid and clean mechanically. Fill up with new cutting fluid.
Keeping the fluid
If you choose to keep the cutting fluid during the holiday break, you should adjust the pH by adding 0,1-0,2% ECOCOOL PH-BOOSTER 1 and possibly 0,2-0,4% ECOOOL PH-BUFFER 9 or 0,15% Contram NBF-21 in systems before stopping.
Please contact us if you want to know more.
|ECOCOOL CLEAN 1||20 liter can||601402432|
|ECOCOOL CLEAN 1||208 liter barrel||601402418|
|ECOCOOL PH-BOOSTER 1||20 liter can||601402500|
|ECOCOOL PH-BUFFER 9||20 liter can||601400179|
|ECOCOOL PH-BUFFER 9||208 liter barrel||601400186|
|Contram NBF-21||5 liter can||800267665|
Contact our customer service for order by phone at +45 32 46 30 00 or e-mail firstname.lastname@example.org.
There are many benefits to be gained from streamlining the handling of cutting fluids, everything from fewer unplanned stoppages to a longer service life for tools and machines. Follow these tips and you’ll considerably increase your chances of keeping production at a consistent high level.