ANTICORIT SV 50265 X
Fast Drying Solvent Based Dry Film Corrosion Preventative
Description
ANTICORIT SV 50265 X is a fast drying solvent based, dry film corrosion preventative for ferrous and non-ferrous metals. It is intended to provide 6-12 months indoor protection under normal storage conditions. ANTICORIT SV 50265 X is will displace water to resist corrosion potential from residual coolant and rinse water on parts, and the products film is readily cleaned from protected parts when necessary. The film is compatible with most lubricating oils, so protected parts may not require cleaning prior to assembly.
Application
ANTICORIT SV 50265 X is applied as received in a well-ventilated area using dip, spray or brush methods. When tanks of the product are not in use, they should be covered and sealed to prevent solvent loss.
Advantages
- Short drying time
- Displaces water
- Cleans and Protects
- Low film weight
- Compatible with lubricating oils
How to Clean
ANTICORIT SV 50265 X films are readily removed from protected parts by vapor degreasing solvents or mild alkaline cleaning solutions, such as RENOCLEAN 9009.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.