LUBRODAL GS B1 - PLUS
water miscible glass dispersion for hot forging of titanium
Performance Features
- builds a thermal resistant and good adhesive film
- excellent lubrication and release properties
- reduces friction
- increases tool life
- minimises oxidation und gas absorbance
- good surface properties
- reduces heat los
Description
LUBRODAL GS B1 – PLUS is used as a water miscible glass coating with good lubrication properties and protection functions, especially in hot forging of titanium and special alloys.LUBRODAL GS B1 - PLUS builds after its application on the metal surface and heating up to the forging temperature a thermal resistant and good adhesive film.LUBRODAL GS B1 - PLUS minimised oxidation and gas absorbance of the hot work piece. LUBRODAL GS B1- PLUS also reduces heat loss during transfer and forging operation.During hot forming operation LUBRODAL GS B1 – PLUS increases the flow of material and improves tool life.
Field of application
LUBRODAL GS B1 - PLUS is ready to use, but it also can be diluted with water up to 1:1. The optimal ratio of dilution has to be determined in practice.Consumption of LUBRODAL GS B1 – PLUS depends on size and shape of the forging part.
Method of application
LUBRODAL GS B1 - PLUS is applied by spraying on the preheated material, but it also can be applied by brushing or dipping. Strength of the glass coating is related to the heating and oven conditions.
Note
For hot metal formingBoth graphite and non graphite as water based or oil based lubricants are available in the LUBRODAL and HYKOGEEN series.
Tööstusharud
- Metal processing
- Forging
Siin esitatud teave põhineb FUCHSi kontserni kogemustel ja teadmistel määrdeainete arendamise ja tootmise vallas ning vastab praegusele tehnika tasemele. Meie toodete tulemuslikkust võivad mõjutada mitmed tegurid, eelkõige konkreetne kasutus, rakendusmeetod, töökeskkond, komponendi eeltöötlus, võimalik väline saastumine jne. Sellest tulenevalt ei ole võimalik esitada meie toodete funktsioonide kohta väiteid, mis kehtiksid igal tingimusel. Meie tooteid ei tohi kasutada õhu- või kosmosesõidukites ega nende osadel. See ei kehti juhul, kui tooteid saab uuesti eemaldada, enne kui komponendid õhu- või kosmosesõidukisse paigaldatakse. Siin toodud teave hõlmab üldiseid, mittesiduvaid juhiseid. Toote omadustele ega toodete sobivusele konkreetseks kasutuseks ei anta ühtegi otsest ega kaudset garantiid. Seetõttu soovitame konsulteerida FUCHSi kontserni rakendusinseneriga, et saada teavet kasutustingimuste ja toodete toimivuskriteeriumite kohta enne nende kasutamist. Kasutaja vastutab toodete funktsionaalse sobivuse testimise eest ning kohustub neid kasutama vajaliku hoolsusega. Meie tooteid arendatakse pidevalt edasi. Seetõttu on meil õigus muuta tootesarju, tooteid ning nende tootmisprotsesse ja kõiki siin esitatud üksikasju mistahes ajal ja ilma ette teatamata, välja arvatud juhul, kui kliendiga on sõlmitud vastupidiseid kokkuleppeid.