SOK MULTITRENN
Special concrete release agent – with marking effect – for polystyrene foam etc.
Performance Features
- free of hydrocarbon (mineral oil)
- no adverse effect on the adhesion of plaster, adhesives or paint
- basis: eco-friendly ester oils
- application temperature: up to 70 °C (shuttering temperature)
- rapidly biodegradable
- universally applicable
- prevents pore formation to a large extent
- provides clean and uniform surfaces
Description
SOK MULTITRENN is a physico-chemically reacting concrete release agent suitable for all current absorbent and non-absorbent shuttering, mainly in precast plants.
Field of application
The blue-colored product was especially developed for the use on polystyrene-foam (e.g. Styrofoam) formwork in ceiling and wall production, and for special applications in the production of supports, beams, and trusses. After its application the blue dye of the product will be destroyed by the alkaline concrete. Thus the gray concrete surfaces will not change their color. The product is not used on the entire surface of the shuttering.
Application
A thin and uniform layer of SOK MULTITRENN is applied by brush, dipping or suitable spraying device (with Teejet nozzle SS 800067) to the clean and dry shuttering. The surfaces treated with SOK MULTITRENN are well visible due to blue coloration. Consumption rates: with non-absorbent shuttering: 20-30 m2/l; with absorbent shuttering: 15-20 m2/l. SOK MULTITRENN may not be diluted with water, oils or solvents – it is ready for use!
Notes
- the duration of storage should not exceed 1 year.
- store barrels horizontally
- reseal container after use
Please observe German federal water act (WHG) and EU safety data sheet! Minor color differences of the product are due to production and do not affect its quality and efficiency. The product is not suitable for the use on white concrete and very light-colored exposed concrete types.
Tööstusharud
- Construction
Siin esitatud teave põhineb FUCHSi kontserni kogemustel ja teadmistel määrdeainete arendamise ja tootmise vallas ning vastab praegusele tehnika tasemele. Meie toodete tulemuslikkust võivad mõjutada mitmed tegurid, eelkõige konkreetne kasutus, rakendusmeetod, töökeskkond, komponendi eeltöötlus, võimalik väline saastumine jne. Sellest tulenevalt ei ole võimalik esitada meie toodete funktsioonide kohta väiteid, mis kehtiksid igal tingimusel. Meie tooteid ei tohi kasutada õhu- või kosmosesõidukites ega nende osadel. See ei kehti juhul, kui tooteid saab uuesti eemaldada, enne kui komponendid õhu- või kosmosesõidukisse paigaldatakse. Siin toodud teave hõlmab üldiseid, mittesiduvaid juhiseid. Toote omadustele ega toodete sobivusele konkreetseks kasutuseks ei anta ühtegi otsest ega kaudset garantiid. Seetõttu soovitame konsulteerida FUCHSi kontserni rakendusinseneriga, et saada teavet kasutustingimuste ja toodete toimivuskriteeriumite kohta enne nende kasutamist. Kasutaja vastutab toodete funktsionaalse sobivuse testimise eest ning kohustub neid kasutama vajaliku hoolsusega. Meie tooteid arendatakse pidevalt edasi. Seetõttu on meil õigus muuta tootesarju, tooteid ning nende tootmisprotsesse ja kõiki siin esitatud üksikasju mistahes ajal ja ilma ette teatamata, välja arvatud juhul, kui kliendiga on sõlmitud vastupidiseid kokkuleppeid.