Jump to content


FUCHS will exhibit at The Bluefield Coal Show this September. 

The Bluefield Coal Show is one of its own with an awesome spread of coal products, coal machinery and equipment, coal mining services, coal extraction services and other coal-related equipment and services.


September 11, 12, 13,  2019 

Brushfork Armory-Civic Center

Bluefield West Virginia

A Worldwide Name, World Class Performance.

FUCHS Lubricants Co. has long been recognized within the mining industry as a leading innovator of lubricants designed for specialized applications in both underground and surface mining. As part of the worldwide FUCHS Group of companies - the largest independent manufacturer of specialty lubricants in the world - we offer the most complete selection of lubricants available from one source


Our experienced FUCHS team will be available to advise on products and process optimization for the application in question.

Phone  708-333-8900


Product Information Download

Featured Products


AW– circulating and hydraulic oils with a high viscosity index, high shear stability and extremely good air release properties





  • Reduces fuel consumption while offering high efficiency
  • Extends service life with the added benefits of less maintenance requirements and failure related downtime
  • Broad temperature range
  • RENOLIN Xtreme Temp 46 is specified in line with DIN 51 524-3 and ISO 11158-HV and fulfills/exceeds their requirements.



Long-term approved special gear oils with extremely high aging stability and excellent detergency (DD) – self-cleaning oils

  • Very good aging resistance (AO booster)
  • Longer lifetime compared to conventional industrial gear oils
  • Low friction, reduced oil sump temperature, increased efficiency
  • Excellent detergent/dispersant properties (sludge carrying capacity)
  • Excellent micro-pitting protection
  • Excellent bearing wear protection – low wear in the FE8 test
  • Excellent load carrying capacity, high EP performance
  • Low foaming

RENOLIN CLP PLUS Series products fulfills/exceeds the requirements according to:

  • DIN 51 517-3: CLP
  • ISO 6743-6: and ISO 12925-1: CKC/CKD
  • AGMA 9005/E02: EP

RENOLIN CLP PLUS Series products are approved by:

  • Friedrich Flender AG, Bocholt, Germany, Flender
  • BA 7300, table A
  • Bosch Rexroth (Lohmann + Stolterfoht, Witten, Germany)



Demulsifying, fully-synthetic industrial gear oils with elevated aging resistance, excellent load carrying capacity and wear protection. RENOLIN UNISYN CLP oils have excellent resistance to micro-pitting. Its reliable lubrication of roller bearings is confirmed by the good results of FE8 testing. It simplifies the conversion process.

  • Low foaming
  • Good air release capacity
  • Very good aging resistance
  • Excellent corrosion protection
  • Excellent viscosity temperature behavior
  • High natural VI (Viscosity Index)
  • Multi-grade character
  • Excellent wear protection, high EP performance
  • Miscible with mineral oil and ester-based gear oils
  • For high and low operating temperatures                           

RENOLIN UNISYN CLP Series oils are recommended for all industrial applications where CLP type synthetic oil is recommended by the manufacturer according to DIN 51517-3. Highly stressed straight bevel gears, spiral bevel gears, worm gears, planetary gears and heavily loaded bearings can be reliably lubricated and protected even at short-term peak temperatures up to 150 °C.


RENOLIN UNISYN CLP Series is approved by:

  • Siemens-Flender AG
  • Bocholt

A high performance calcium sulfonate complex thickened grease formulated with 100% virgin base oils, an optimized extreme pressure/anti-wear additive system, corrosion/oxidation additive package and fortified with a synergistic solids additive system for maximum protection in heavily loaded/shock loaded applications.

  • Multi-purpose/high temperature/high performance
  • Excellent water resistance
  • Very shear stable
  • Extreme pressure/anti-wear/corrosion protection
  • Synergistic solids additive system
  • Corrosion resistant
  • Protects against shock loading                         

Meets/exceeds key performance requirements of:

  • Bucyrus
  • Caterpillar
  • Komatsu
  • Liebherr
  • LeTourneau

RENOLIT CENTAK OG is a high performance multi-service lubricant designed for open gears and highly loaded components in severe duty mining applications. It is fortified with high viscosity base oils, select polymers and lubricating solids along with chemical anti-wear (AW) and extreme pressure (EP) additives



  • Rapidly establishes a tenacious lubricant film
  • Protects gear teeth, bearing surfaces and other components when subjected to extreme operational and environmental conditions
  • Superior film retention and adhesion to the components allows for extended lubrication intervals
  • Meets/exceeds key performance requirements of Bucyrus SD4713, P&H 464 and P&H 520
  • Multi-service lubricant for use on shovels and draglines
  • Special solid lubricants for boundary lubrication conditions
  • Exceptional lubricant film retention and component adhesion
  • Extreme pressure/anti-wear protection extends component life
  • Excellent resistance to wet and freezing conditions



A non-heated automatic system application lubricant for the Monihgan walking cam mechanism on Bucyrus-Erie drag- lines.

  • Eliminates the use of drum heaters and greatly simplifies maintenance and ease of application.
  • The Lubrene Walking Cam Compound has been used with great success in South African mines since 1992 with applications of as little as 4g per step. The 20+ draglines using Lubrene Cam Compound have not had a lubricant related failure since its inception.

RENOCLEAN Air Spray-Down is an additive for water-spray systems to greatly improve the wetting ability of water to reduce dusts. It has a potent combination of wetting agents for effectiveness on dust generated from multiple sources. It increases the ability of water to adhere to and spread out over airborne particles.


In addition, it improves the ability of water to penetrate and dampen loose surfaces thereby facilitating descaling in piping, cooling and spray systems.

  • Improves air quality
  • Increases visibility
  • Reduces water consumption
  • Easy to mix and apply
  • Low odor
  • Lowers maintenance costs
  • Reduces housekeeping
  • No hazardous labeling
  • Non-corrosive
  • Globally available formulations
  • Worldwide technical back-up                                       

RENOCLEAN AIR SPRAY DOWN is a surfactant that reduces the surface tension of water to penetrate and dampen airborne dust. This product is diluted in spray water to a 0.02%-0.05% ratio. The main application is used in underground spray water for cutting machines. This product can be used in any application where spray water is used to suppress dust. We have a specific pump system that was designed to inject this product at the desired ratio available.


Typically used at concentrations of





RENOCLEAN Air Hold Down utilizes a combination of natural binding and wetting agents to bind dust particles together. Upon evaporation of the diluent water, the residues bond particles together to hold dust emissions down. Subsequent re-treatment will increase the residues remaining in the soil to bind particles. Additionally, the product has a humectant property that helps retain latent moisture.


RENOCLEAN Air Hold Down is supplied as a concentrate that is diluted to the desired ratio using locally available water.


  • Improves air quality
  • Increases visibility
  • Reduces water consumption
  • Easy to mix and apply
  • Low odor
  • Lowers maintenance costs
  • Reduces housekeeping
  • No hazardous labeling
  • Non-corrosive
  • Globally available formulations
  • Worldwide technical back-up
  • Environmentally friendly                                         


RENOCLEAN AIR HOLD DOWN is a polymeric binding and wetting agent. This product is mixed with water at a 2%-10% ratio and applied. While the polymeric properties help bind the dust particles together and stop them from becoming airborne the wetting agent helps maintain moisture in the ground. This product is designed for roadway dust suppression.


RENOCLEAN Air Lock Down is a high performance dispersed polymeric binding agent. Upon evaporation of the diluent water, residues cure to form a resilient, flexible film that locks the dust down by crusting loose surfaces.


RENOCLEAN AIR LOCK DOWN is a robust and persistent control against the effects of wind, vehicles, and heavy equipment. It is long-lasting and rain resistant.

  • Improves air quality
  • Increases visibility
  • Reduces housekeeping
  • Lowers maintenance costs
  • Globally available formulations
  • Reduces water consumption
  • Worldwide technical back-up
  • No hazardous labeling
  • Non-corrosive
  • Easy to mix and apply
  • Low odor
  • May reduce explosion hazards                                           

RENOCLEAN AIR LOCK DOWN is a dispersed polymeric binding agent. This product is mixed with water at a 2%-10% ratio and applied. Upon evaporation of the diluent water, the residues cure to form a flexible film to lock down the dust. It is typically used on stockpiles and rail cars of dusty material (primarily coal currently).


Typically applied at 5%-10%


5% MINING GREASE is a lithium complex thickened grease formulated with 100 % virgin base oils, an optimized extreme pressure / anti-wear additive system, corrosion protection and oxidation protection additive packages.

5% MINING GREASE is also fortified with a synergistic 5 % solids additive system that provides maximum EP and anti-wear properties.

  • Multi-Purpose
  • High Performance
  • Excellent Water Resistance
  • Very Shear Stable
  • Excellent Wear Protection
  • Extreme Pressure
  • Corrosion Protection
  • Synergistic 5% Solids
  • Shock Load Protection                                    





RENOLIT UNIWRL 2000 SERIES are lithium complex, semi-synthetic greases, formulated from highly refined mineral base oil, synthetic base stock, and incorporates the latest in additive technology that provides ultra-high performance in a variety of  applications. RENOLIT UNIWRL 2000 SERIES are designed for high temperature, high load, and slow speed applications where there is a great demand on the grease to provide sufficient film strength. Their higher base oil viscosities provide for enhanced sealing properties’ reducing the infiltration of outside contaminates into the load zone and also provided for shock load protection.

  • Multi-Purpose / High Temperature / Performance
  • Excellent Water Resistance
  • Very Shear Stable
  • Extreme Pressure / Anti-Wear Protection
  • Will not “Squeeze Out” / Adhesive
  • Excellent Corrosion Resistance
  • High Base Oil Viscosity for Enhanced Film Strength                                             



Renolit Replex Series greases are lithium complex thickened greases formulated with pure virgin base oils, a heavy duty extreme pressure/anti-wear additive system, corrosion/oxidation additive package and is available in three NLGI Grades. Renolit Replex Series greases have a long track record of proven field performance to provide protection in heavy industrial, commercial, automotive, mining and other severe applications. Renolit Replex Series greases are extremely shear stable, have excellent pumpability and are usable in very broad range of applications.

  • Multi-Purpose/High Temperature/Performance
  • Excellent Water Resistance
  • Very Shear Stable
  • Extreme Pressure/Anti-Wear/Corrosion
  • Excellent Pumpability
  • Available in Three NLGI Grades
  • Protection Against Shock Loading                                                           



RENOLIN MINE AW oils are carefully formulated for use in underground mining machinery. This special formulation emphasizes AW, R&O, and AF additives. This unique design provides excellent performance at a competitive price, which is  especially helpful in mining operations, where leakage and frequent oil make-up are operational concerns

  • Compatible With Other Conventional Hydraulic Lubricants
  • Reduces Deposits and Sludge
  •  Excellent Anti-Wear Performance
  •  Excellent Seal/Elastomer Compatibility
  • Excellent Foam uppression
  • Available in ISO Viscosity Grades 68, 100, & 150                                                           



  • Hagglunds Denison HF -2
  • U.S.Steel 127

GEARMASTER SYN Series synthetic lubricants are fully formulated with highly effective anti-wear and extreme pressure additive packages. The series includes ISO viscosity grades 68, 100, 150, 220, 320, 460 and 680.

GEARMASTER SYN Series lubricants exceed AGMA EP specifications for industrial gearboxes and conform to CLP type according to DIN 51517-3. The carefully selected synthetic base ensures compatibility with seals and gasket materi-als, as well as miscibility with both mineral oil and ester based gear oils. High viscosity index and su-perior resistance to thermal breakdown allow these products to provide proper service at high operating temperatures than convention mineral based lubricating oils.

  • For all types of gearing: spur, herringbone, helical, bevel, spiral bevel, hypoid and worm
  • Thermally stable and heat resistant, no carbonaceous residue
  • Extended service life many times beyond that of petroleum oils
  • Compatible with all seals, gaskets and elastomers.                                                 



 Conforms to CLP type oil according to DIN 51517-3


RENOLIT LSTO is a unique synthetic gear lubricant suitable for many problem industrial gearboxes and bearings. Its thixotropic characteristic allows it to be used in gearboxes and bearings that are prone to leakage when using traditional gear oils and greases that run out. Thixotropy is its ability to move from a semi-solid state when at rest to relatively fluid when it is mechanically manipulated or placed under pressure as would occur in a gearbox or bearing application.  Only the portion of RENOLIT LSTO actually being mechanically manipulated or placed under pressure will become relatively fluid, hence the remaining product forms a supplementary seal to keep out contaminants and prevent leakage of the lubricant out of the units.

  • Anti-Leak Properties / Forms Supplementary Seal to Keep Out Contaminants
  • Heavier Than Water / Will Not Wash-Out of Gearboxes or Bearings
  • Extreme Pressure / Anti-Wear Protection
  • Excellent Yellow Metal and Elastomer Compatibility
  • Multi-Functional Performance / Works in All Gear Configurations and Orientations
  • Eliminates Dry Start-Up Wear / Excellent for Intermittent Operation                                                                        



TITAN UNIMAX CK SAE 15W-40 was developed to comply with the new API CK-4 category.

TITAN UNIMAX CK SAE 15W-40 is particularly good for use in vehicles fitted with exhaust gas after treatment systems such as Diesel Particulate Filters (DPF), Diesel Oxidation Catalyst (DOC), high rate of Exhaust Gas Recirculation (EGR), two-stage turbo charging and SCR-Catalyst (Selective Catalytic Re-duction) or any combination of the given technologies

  • Backwards compatible for older diesel engines & specifications.
  • Excellent product consolidation across mixed fleet.
  • Excellent wear protection.
  • Extended drain potential.
  • Improved oxidation stability
  • Protecting exhaust gas treatment systems.
  • Low aeration leading to improved lubrication.
  • Excellent soot handling properties.
  • Resists sludging of internal engine compo-nents.
  • Assists free running of engine.                                                                                                   


• API CK-4


AGRIFARM UTTO MP is a Super high-performance oil (UTTO/MFO) for use in transmission and hydraulic systems with integrated wet brakes, clutches and differentials for agricultural and construction machinery based on a careful selection of base oils and additive technology guarantees an excellent wear protection, a good viscosit y and temperature and best friction property

  • Excellent protection from wear
  • Excellent protection from sludge, deposits,lacquering
  • Good anti-corrosion performance
  • Reduces brake chattering and squeaking
  • Optimum viscosity-temperature behaviour
  • Applicable as all season lubricant
  • Good synchromesh performance
  • Good seal and yellow metal compatibility                                                                 


• ZF TE-ML 03E, 05F, 06K, 17E, 21F (ZF002183)


• AGCO Powerfluid 821 XL

• AGCO Q -186 (Whitefarm)


•CASE MS 1230, 1210, 1209, 1207,1206

•CLAAS / LANDINI /SAME-Transmission

•CNH MAT 3505, 3506, 3509, 3525, 3526,


•FNHA-2-C-200.00 /-201.00

•FORD M2C48-C3, ESN M2C86-B/C,M2C134-D



• MASSEY FERGUSSON CMS M 1145, 1143, 1141,1135

• NH 410B

• SAE J300:10W-30

• SAE J306:75W-80

•SDFG OT 1891A

•VALTRA G2-08,G2-B10


SOLCENIC GM 20 is a fire-resistant hydraulic fluid developed by the Fuchs Global team for use in longwall mining.

The emulsion, formed with superior corrosion protection additives and lubricity enhancers, is stable in mine water when mixed at 2.0% by volume. SOLCENIC GM20 is delivered as a concentrate and is mixed on- site as needed with a locally available water source.

Fuchs provides testing of the emulsion and the mine water. Each of our field representatives is a qualified mine engineer with knowledge of the fluid and the system. Not only is a field report instantly handed to the customer, but also a more-detailed analysis can be performed in our laboratories located around the world.

SOLCENIC GM20 mixes easily with water and is compatible with commercially available mixing units such as Conflow, Venturi, Dosatron and LMI.

  • Suitable in waters up to 250ppm hardness per CaCO3.
  • Biodegradable as determined by test method EPA 40 CFR 796.3240 modified OECD 301E “Ready Biodegradability”
  • Produced in ISO approved facility                                                        

Meets the Joy Mining criteria for use at 2.0% mix by volume in #18 Spec water

DBT Approved at a mix of 2.0% in mine specific water. Inbye and AEMI approved


SOLCENIC 2012 is supplied as a concentrate to be mixed on site with suitable waters. The resulting emulsion is stable and provides excellent corrosion protection.

The quality of the mine water is important as it can influence the stability and anti-corrosion properties of the fluid. It is recommended that a qualified representative sample the make-up water and emulsion for analysis in our laboratory

  • Suitable in waters up to 750ppm hardness per CaCO3
  • Biodegradable as determined by test method ISO 7827-1994 based on OECD “Ready Biodegradability” tests 301 and 301E


Meets Joy criteria for use at 3.5% mix by volume in #18 Spec water. For waters of #19 hardness, the mix is approved at a level of 5.0%


DBT Approved for use at 3.0% by mix volume in

X-Water and at 5.0% in Z-water.

MSHA Approval number 30-4-27