TUF DRAW 1126
Water-Miscible Forming Fluid
Description
TUF DRAW 1126 is a chlorine-free, water emulsifiable drawing and stamping compound. It is intended for moderate drawing, stamping and blanking operations on steel, galvanized steel, stainless steel, aluminum and nickel alloys.
TUF DRAW 1126 is formulated with anti-wear agents to provide excellent part quality and extended tool life. Further, it contains corrosion inhibitors to reduce rework, and it is formulated with emulsifiers to ensure easy cleaning. Additionally, Tuf Draw 1126 forms a stable emulsion in hard or soft water for consistent performance.
How to Use
Moderately Severe Operations: TUF DRAW 1126 is used as received without dilution. For less severe operations, it is diluted with water, blending oil or solvents. When a paste type compound is required: Mix TUF DRAW 1126 with water at a ratio of 1 part water to 1 part TUF DRAW 1126. For flood or spray application: Use TUF DRAW 1126 at dilution ratios of 2 to 10 parts water to 1 part TUF DRAW 1126.
Your FUCHS representative can work with you to optimize the most efficient dilution and application techniques.
The product should be stored in its original sealed container at temperatures between 45°F – 90°F.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Contains anti-wear agents
- Added corrosion inhibitors
- Chlorine-free
- Formulated with emulsifiers
- Stable emulsions
- Excellent part quality, extended tool life
- Reduced rework
- Easier waste treatment
- Easy cleaning
- Consistent performance
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.