TUF DRAW 1730R
Heavy Duty Coarse Emulsion Water Miscible Drawing and Stamping Fluid
Description
TUF DRAW 1730R is a heavy duty, course emulsion chlorinated, water dilutable drawing and stamping fluid. It is intended for severe drawing, stamping and blanking operations on heavy gauge steel, stainless steel, aluminum and nickel alloys. It is not recommended for copper or brass, unless parts are cleaned immediately after forming.
TUF DRAW 1730R is water dilutable so is economical to use and is easily cleaned from parts. It contains a corrosion preventive to provide "in process" corrosion protection.
How to Use
TUF DRAW 1730R can be applied with roller coat, brush or drip equipment. It may be used as received or diluted with blending oil or solvents depending on the operation. It can be diluted with water for flood or spray applications. TUF DRAW 1730R forms a coarse water mixture when used in this manner, therefore, constant agitation is required to maintain performance.
Typical water mix range is 2 to 4 parts water to one part TUF DRAW 1730R. For easy operations, the product can be diluted with up to 10 parts water
Advantages
- Heavy duty formula
- Water dilatable
- Contains a corrosion inhibitor
- Performs difficult jobs
- Low use cost/easily cleanable
- Good "in process" corrosion protection
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.