TUF DRAW 2335
Water-Miscible Forming Fluid
Description
TUF DRAW 2335 is a water-emulsifiable, synthetic drawing and stamping compound. It is intended for severe drawing, stamping and blanking of titanium, galvanized steels, aluminum, copper, brass, nickel and silver alloys. TUF DRAW 2335 produces stable emulsions for uniform performance and results, and it is readily cleaned to reduce down-stream problems.
TUF DRAW 2335 contains state of the art lubricity additives to provide fine surface finishes and extended tool life. It also contains an excellent corrosion inhibitor package for safety on non-ferrous alloys. TUF DRAW 2335 is compatible with carbide dies to protect tooling, and it is chlorine and sulfurfree.
How to Use
TUF DRAW 2335 is designed for use as received. If desirable, and depending on the severity of the application, it may be diluted with water. To mix, always add TUF DRAW 2335 to water with agitation. The maximum recommended dilution is 1 part product to 10 parts water. Your FUCHS representative can work with you to optimize the most efficient dilution and application techniques.
The product should be stored in its original sealed container at temperatures between 45°F – 90°F.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Contains lubricity additives
- Corrosion inhibited
- Compatible with carbide dies
- Chlorine and sulfur-free
- Forms stable emulsions
- Fine surface finishes, extended die life
- Safe on non-ferrous metals
- Protects tooling
- Easier disposal
- Uniform performance and results
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.