RENOFORM OS 2806 M100 X
(formerly TUF DRAW 2806 M100 X)
Heavy Duty Water Emulsifiable Drawing and Stamping Compound
Description
RENOFORM OS 2806 M100 X is a heavy duty water emulsifiable drawing and stamping compound. It is intended for severe drawing, stamping and blanking operations primarily for use on steel and stainless steels. It can also be used for non- ferrous alloys, provided formed parts are cleaned immediately.
RENOFORM OS 2806 M100 X is water soluble so it is economical to use and it is easily cleaned from parts. It contains a rust inhibitor to provide excellent “in-process” corrosion protection of ferrous metals. RENOFORM OS 2806 M100 X is non- gumming for a clean running operation, and it is compatible with carbide tooling.
How to Use
RENOFORM OS 2806 M100 X can be applied with roller coat, brush or drip equipment. When diluted with water to a fluid state, it can be flood or spray applied.
For very difficult draws, use RENOFORM OS 2806 M100 X as received without dilution.
For flood or spray application, mix RENOFORM OS 2806 M100 X with water, blending oil or solvents. Typical dilution range is 2 to 10 parts water to 1- part product. When mixing with water, always add RENOFORM OS 2806 M100 X to the water, with agitation.
Advantages
- Heavy duty formula
- Water soluble
- Contains a corrosion inhibitor
- Non-gumming
- Makes difficult and complex parts
- Low use cost/easy cleaning
- Good “in-process” corrosion protection for ferrous metals
- Clean running operation
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.