RENOCLEAN 102 LK-6
Liquid Multi-Metal Process Cleaner and In-process Rust Preventative
Description
RENOCLEAN 102 LK-6 is intended as an “in-process” cleaner for a wide variety of ferrous and non-ferrous metals. These include cast iron, carbon steels, aluminum and aluminum die castings. RENOCLEAN 102 LK-6 rinses freely if desired to remove any film from cleaned parts. If not rinsed following cleaning, it leaves a barrier film to provide “in-process” corrosion protection for both ferrous and non-ferrous metals. It is suitable for both spray and immersion applications and is especially effective for single stage “in-process” washers where cleaning with corrosion protection are important.
RENOCLEAN 102 LK-6 rejects oil to provide a long bath life, and it serves as an exceptional rust preventive either by itself or following alkaline cleaning.
Advantages
- Excellent “in-process” corrosion protection
- Free rinsing
- Removes many soils/safe on many metals
- Functions as a cleaner and rust preventive
- Long bath life
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.