SPRAY CLEAN 6513
Spray / Soak / Ultrasonic Cleaner
Description
SPRAY CLEAN 6513 is a highly effective liquid alkaline metal cleaning compound that removes mill oils, soaps, drawing oils and shop dirt. It leaves an anti-rust film on the metal surface if not rinsed. This product is especially designed to prevent rusting of wet parts before they are dried and processed. SPRAY CLEAN 6513 tolerates a wide variety and large volume of soils before dumping is required. It is low foaming at all operating temperatures. SPRAY CLEAN 6513 has a highly effective surfactant system that provides for good drain off and minimum contamination of subsequent tanks. Special water conditioners make it effective in hard or soft water. SPRAY CLEAN 6513 can also be used as a low foam burnishing compound.
How to Use
SPRAY CLEAN 6513 can be used on ferrous and non-ferrous metals. Normal concentration is 5 % to 10% by volume. It can be used effectively from ambient temperature up to 60°C depending on the application. It is designed for water hardness of 500 ppm and below. Your local Fuchs representative can make specific recommendations for your operation.
Advantages
- Multi – Metal application
- Carries Automotive approval
- Low-foam wide-Temperature –range application
- Soft and hard water stable
Storage and Safety
The product should be stored in its original sealed container at temperatures between 450 F– 900 F.
Safety data sheets (SDS) are available. Before handling, read the product informations and SDS for proper handling and health hazard information.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.