Liigu sisule

SOK AQUA G PLUS

Concrete release agent emulsion, preferably for use in plants manufacturing prefabricated components

Performance Features

  • operating temperature up to 80 °C (shuttering temperature)
  • does not attack Styrofoam
  • solvent free
  • easy to wipe off
  • largely prevents pore formation
  • ensures the production of clean and uniform surfaces
  • contains very effective corrosion protection for steel moulds
  • does not impair the adhesion of plaster, adhesives and paint
  • optimised for use on vertical surfaces
  • very good suitability as "board oil" for stone manufacture; good biodegradability

Description

SOK AQUA G PLUS is an aqueous concrete release agent emulsion. SOK AQUA G PLUS is solvent free. SOK AQUA G PLUS is very suitable for use with standard concrete and easy compacting concrete (ECC).

Field of application

SOK AQUA G PLUS is suitable for the use on steelmould, plastic-coated and planed wooden shuttering.

Application

SOK AQUA G PLUS is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 130 m² according to the type of shuttering. SOK AQUA G PLUS may not be mixed with release agents, water, oils or solvents. It is ready for use!

Notes

The container must be protected from frost and direct solar radiation. The container is to be well sealed after each withdrawal.
The product is to be used within 6 months of production (for production date see bar code label).
Please observe water resources policy act and EU safety data sheet!
The product may not come in contact with zinc or galvanised materials.
The biological degradability of > 80% is related to the oil phase (modified storm test, easily biodegradable).
Store cleaning rags wetted with SOK AQUA G PLUS in a closed and approved container.

Tööstusharud

  • Construction
Märkus

Siin esitatud teave põhineb FUCHSi kontserni kogemustel ja teadmistel määrdeainete arendamise ja tootmise vallas ning vastab praegusele tehnika tasemele. Meie toodete tulemuslikkust võivad mõjutada mitmed tegurid, eelkõige konkreetne kasutus, rakendusmeetod, töökeskkond, komponendi eeltöötlus, võimalik väline saastumine jne. Sellest tulenevalt ei ole võimalik esitada meie toodete funktsioonide kohta väiteid, mis kehtiksid igal tingimusel. Meie tooteid ei tohi kasutada õhu- või kosmosesõidukites ega nende osadel. See ei kehti juhul, kui tooteid saab uuesti eemaldada, enne kui komponendid õhu- või kosmosesõidukisse paigaldatakse. Siin toodud teave hõlmab üldiseid, mittesiduvaid juhiseid. Toote omadustele ega toodete sobivusele konkreetseks kasutuseks ei anta ühtegi otsest ega kaudset garantiid. Seetõttu soovitame konsulteerida FUCHSi kontserni rakendusinseneriga, et saada teavet kasutustingimuste ja toodete toimivuskriteeriumite kohta enne nende kasutamist. Kasutaja vastutab toodete funktsionaalse sobivuse testimise eest ning kohustub neid kasutama vajaliku hoolsusega. Meie tooteid arendatakse pidevalt edasi. Seetõttu on meil õigus muuta tootesarju, tooteid ning nende tootmisprotsesse ja kõiki siin esitatud üksikasju mistahes ajal ja ilma ette teatamata, välja arvatud juhul, kui kliendiga on sõlmitud vastupidiseid kokkuleppeid.

Meie kontaktandmed
Telefon
+372 5103382
Teeninduskontakt
+372 625 7780
Tööaeg:

E–R: 8.00–17.00