RENOLIN UNISYN CLP PA-SERIES
Fully synthetic gear adn paper machine oil for thermally and mechanically highly stressed machine units
Description
Fully synthetic, demulsifying industrial gear oil with excellent resistance to ageing, good load carrying capacity and excellent wear protection. RENOLIN UNISYN CLP PA products are especially recommended for applications with a wide operating temperature range (excellent high and low temperature behavior). In gear units with circulating and oil sump temperatures up to 90°C the oil change intervals can be considerably extended. In general, RENOLIN UNISYN CLP PA products are miscible and compatible with mineral oil- based gear oils which allow an easy change- over procedure.
Application
RENOLIN UNISYN CLP PA series was especially developed to meet the demands made on roller bearing lubrication in the wet and dry sections of paper machines. RENOLIN UNISYN CLP PA products exceed the requirements for gear oils according to DIN 51 517, part 3.
Advantages
- Low foaming tendency
- Good air release properties
- Excellent resistance to ageing, high thermal stability
- Good corrosion protection
- Good filterability
- Excellent viscosity-temperature- behavior
- High natural viscosity index (VI)
- Multigrade character
- Excellent wear protection
- Miscible with mineral oil- and ester-based gear oils
- Good demulsifying properties
- RENOLIN UNISYN CLP 220 PA meets the requirements for lubricating oils in paper machines according to the FAG (test temperature 120 °C) and SKF Specifications
- RENOLIN UNISYN CLP 220 PA meets the requirements according to specifications Voith VN 108 (2005)
- Metso RAU4L00659.06EN (2010
Industries
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.