RENOFORM OL 1814
Neat Oil Forming Fluid
Description
RENOFORM OL 1814 is a chlorine free metal forming oil intended for light duty operations on cold rolled steel, stainless steel and other ferrous and non-ferrous substrates. RENOFORM OL 1814 contains lubricity enhancers and extreme pressure (EP) additives to provide smooth metal flow and extended tool life. RENOFORM OL 1814 has a very low viscosity so it is easily applied. Residues are readily cleaned from finished parts to prevent down-stream problems.
Application
RENOFORM OL 1814 is used undiluted as received. It can be applied by sprayers, roller, dip, or flood and performs effectively in recycling systems. The product should be stored in its original sealed container between 45° - 90° F. Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information. RENOFORM OL 1814 is readily cleaned from parts with most alkaline part cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Advantages
- Contains lubricity and EP additives
- Low viscosity
- Readily cleaned
- Smooth metal flow/extended tool life
- Parts need not be cleaned immediately after forming
- Easy to apply
- Prevents down-stream problems
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.