RENOFORM PST 1011
Paste Water Miscible Forming Fluid
Description
RENOFORM PST 1011 is a water-soluble, paste type drawing compound. It is intended for drawing both ferrous and non-ferrous metals. RENOFORM PST 1011 contains a lubricity package that is especially effective for drawing aluminum, copper and brass. It contains no chlorine, sulfur, pigments or abrasive materials for easier waste treatment and cleaning. RENOFORM PST 1011 is stable in hard water, and its films are readily removed from finished parts to avoid “down-stream” problems.
How to Use
RENOFORM PST 1011 may be used as received for very severe applications. However, it is normally mixed with water. The dilution ratio ranges from 1:1 to 1:5 depending on the metal and the difficulty of the draw. When diluting, always add the paste to water while mixing.
Advantages
- Excellent lubricity
- No channeling or tunneling
- Sulfur and chlorine-free
- Readily cleaned
- Minimized galling, maximized die life, improved surface finish
- No bare spots
- Easier disposal
- Reduced down-stream problems
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.