RENOFORM OS 2805
Heavy Duty, Water Soluble Drawing & Stamping Compound
Description
RENOFORM OS 2805 is a heavy-duty, chlorinated soluble oil intended for severe drawing and stamping on steel and stainless steel alloys. Renoform OS 2805 contains very long chain chlorinated paraffins, however, it has enhanced corrosion control and ease of cleaning as compared to other chlorinated fluids.
RENOFORM OS 2805 is water-soluble, so it is economical to use and is easily cleaned from parts. It contains a rust inhibitor to provide excellent “inprocess” corrosion protection of ferrous metals. RENOFORM OS 2805 is non-gumming for a clean running operation, and is compatible with carbide tooling.
How to Use
RENOFORM OS 2805 can be applied with roller coat, brush or drip equipment. When diluted with water to a fluid state, it can be flood or spray applied.
For very difficult draws, use RENOFORM OS 2805 as received without dilution. For easier operations, mix RENOFORM OS 2805 with water, blending oil or solvents. For flood or spray applications, the typical dilution range is 1 to 9 parts water to 1 part product.
Your FUCHS representative can assist you in optimizing your dilution and applications.
The product should be stored in its original sealed container at temperatures between 45°F – 90°F.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
How to Clean
RENOFORM OS 2805 is readily cleaned from work with alkaline cleaner solutions. Your local FUCHS representative can provide you with specific recommendations for your operation.
Advantages
- Heavy duty formula
- Non-regulated chlorinated paraffin
- Water soluble
- Contains a corrosion inhibitor
- Compatible with carbide tooling
- Makes difficult and complex parts
- Low use cost, easy cleaning
- Good “in-process” corrosion protection for ferrous metals
- Extended tool & die life
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.