ANTICORIT DFW 7301
Dewatering Corrosion Preventative
Description
ANTICORIT DFW 7301 is a low viscosity water dis-placing, barium free corrosion preventative formu-lated to provide medium to long term protection (12-18 months) depending on the application and stor-age conditions. The product leaves a thin film which is nearly imperceptible.
ANTICORIT DFW 7301 is used for the corrosion pro-tection of metal parts, tools, machine components, gears, motors, and spare parts. The film is compati-ble with all conventional motor and gear oils and does not require removal before installation or start up. ANTICORIT DFW 7301 resist acidic or alkaline contamination, and therefore is especially suitable for use in areas where acid fumes exist.
ANTICORIT DFW 7301 is also suitable for inter-pro-cess, storage, and also as a transport protection of components within North America and for overseas shipment. It may be combined with VCI products..
Application
ANTICORIT DFW 7301 is typically applied via dip or spray and can be removed with RENOCLEAN brand alkaline or solvent cleaners. In some application removal from the surface is not necessary as ANTICORIT DFW 7301 is compatible with common lubricating oils.
Advantages
- Short drying time
- Rapidly dewaters parts
- Good corrosion protection
- Low film weight
- Barium free
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.