ECOCOOL SYN 1722
Water Miscible Cutting & Grinding Fluid
Description
ECOCOOL SYN 1722 is a synthetic cutting and grinding fluid intended for working with steel and cast iron. It contains lubricity additives to provide superior surface finishes and extended tool life, and it is very low foaming for compatibility with foam generating applications such as Blanchard grinding, centerless grinding and cutting with high pressure spray.
ECOCOOL SYN 1722 provides superior in-process corrosion protection to safeguard parts and tools, and it has excellent swarf and chip settling characteristics to promote easy filtration and a clean running operation. Further, ECOCOOL SYN 1722 is formulated without chlorinated paraffin for easier disposal
How to Use
ECOCOOL SYN 1722 is mixed with water for use. Your local FUCHS representative can provide you with specific recommendations for your operation. When mixing, always add ECOCOOL SYN 1722 concentrate to water.
The product should be stored in its original sealed container at temperatures between 45°F– 90°F.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Low foaming
- Good in-process corrosion protection
- Excellent settling characteristics
- Contains lubricity additives
- Compatible with high foam applications
- Safeguards parts and equipment
- Clean running operation
- Superior surface finishes
- Extended tool life
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.