ECOCUT 710 LE
Cutting & Grinding Oil
Description
ECOCUT 710 LE is a high-performance, chlorine-free oil for all operations on difficult and extremely difficult to machine materials. Also recommended for other machining operations such as broaching and deep hole drilling when a low-viscosity, highly active cutting oils is required. ECOCUT 710 LE is not recommended for use on yellow metals.
ECOCUT 710 LE is a low-misting, neat metalwork- ing oil containing a special combination of chlorine- free high-performance EP additives and polar lubricity improvers. Shear-stable anti-misting agents in low-aromatic and low-misting base oils largely su- press the formation of oil mist and oil vapors during machining. These features effectively improve work- shop safety and cleanliness.
How to Use
ECOCUT 710 LE is used as received for all machining operations. Your local FUCHS representative can provide you with specific recommendations for your operation.
The product should be stored in its original sealed container at temperatures between 45ºF and 90ºF.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Can be used as a dual purpose screw machine oil to eliminate machine side/tool side cross contamination
- High film strength for severe machining operations
- Heavy duty lubricity package for increased productivity
- High film strength for severe machining operations
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline or solvent-based cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.