ECOCOOL SYN 7060
Water Miscible Cutting & Grinding Fluid
Description
ECOCOOL SYN 7060 is a moderate duty synthetic cutting and grinding fluid. Its outstanding properties of lubricity, pH stability, corrosion protection, tramp oil rejection, detergency, mix stability in hard water, and very low foam make it perfect for cutting, grinding, drilling, tapping, milling, sawing, and other applications on ferrous metals. It is not recommended for brass or other copper alloys.
ECOCOOL SYN 7060 affords excellent rust protec- tion to preserve parts and equipment. It is ideal for high pressure (>1000 psi) fluid delivery applica- tions.
ECOCOOL SYN 7060 rejects tramp oil and quickly settles fines for a clean running operation.
How to Use
ECOCOOL SYN 7060 is mixed with water for use. Your local FUCHS representative can provide you with specific recommendations for your operation. When mixing, always add ECOCOOL SYN 7060 concentrate to water.
The product should be stored in its original sealed container at temperatures between 45°F– 90°F.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Excellent rust protection
- Rejects oil
- Settles fines
- Excellent lubricity characteristics
- Low foam
- Good tool life and surface finishes
- Extended sump life and lower waste treatment costs
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.