ECOCUT SYN 5600
Cutting & Grinding Oil
Description
ECOCUT SYN 5600 is a chlorinated paraffin and sulfur free oil, suitable for both cutting and forming applications. It is intended for severe performance applications such as gear cutting and deep drawing where high lubricity without sulfur or chlorine is re- quired.
ECOCUT SYN 5600 affords excellent lubricity to provide fine finishes, superior part quality and extended tool life. It produces less smoke than a traditional machining oil for more pleasant working conditions and it cleans readily to minimize downstream problems. Since it is chlorine and sulfur free, disposal is easier.
How to Use
ECOCUT SYN 5600 is used as received for all ma- chining operations. Your local FUCHS representa- tive can provide you with specific recommendations for your operation.
The product should be stored in its original sealed container at temperatures between 45ºF and 90ºF.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Excellent lubricity for fine finishes, superior part quality, & extended tool life
- Less smoke for more pleasant working conditions
- Easily cleaned for fewer downstream problems
- Chlorine and sulfur free
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.