RENOCLEAN EC 50
Solvent Emulsion Cleaner
Description
RENOCLEAN EC 50 is a solvent emulsion cleaner intended for removing coolants, cutting oils, metal chips and other shop soils from steel, cast iron, aluminum and zinc in spray or immersion equipment.
RENOCLEAN EC 50 contains a solvent to enhance cleaning ability and, when not rinsed, it leaves a barrier film on processed parts to provide excellent “in process” corrosion protection.
RENOCLEAN EC 50 will tend to emulsify oils and greases. If residue from these types of materials becomes excessive, the parts may be rinsed to remove it. Note: rinsed, parts lose rust protection. If contamination is severe the bath should be dumped and recharged.
Application
Mild steel is suitable for tanks, spray and heating equipment.
How to Use
Spray or agitated immersion application:
Concentration - 5-10%
Application Temp. 100°F to 130°F
Advantages
- Versatile Cleaner
- Excellent “in process” corrosion protection
- Removes a wide variety of metalworking soils
- Removes many soils/ Safe on many metals
- Reduced rejects
Concentration Determination
Concentrations of RENOCLEAN EC 50 are easily measured using a refractometer or a laboratory acid split procedure. Note: Emulsified soils may indicate a higher concentration than actual.
A refractometer chart and the laboratory acid split procedure are available from your local FUCHS representative.
Industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.